标题: tensigrity modeling [打印本页] 作者: jason 时间: 2012-3-30 17:58 标题: tensigrity modeling 模拟自由下落,袋鼠新手,呵呵作者: jason 时间: 2012-3-30 17:59
补张图片。。。作者: pqwpqw12345 时间: 2012-3-30 18:54
看不懂{:3_55:}
LZ能说明一下吗作者: pqwpqw12345 时间: 2012-3-30 18:55
看不懂{:3_55:}
LZ能说明一下吗作者: jason 时间: 2012-3-30 18:59 4#pqwpqw12345
不好意思,标题上拼错了,是tensegrity modeling。。就是模拟一个张拉结构,自由下落后的状态。。作者: hexianghai 时间: 2012-3-30 20:40
{:3_53:}{:3_53:}{:3_53:}{:3_53:}作者: pqwpqw12345 时间: 2012-3-30 21:07
下载了 不懂怎么玩 我才是新手{:3_63:}作者: jason 时间: 2012-3-30 21:17 7#pqwpqw12345
激活那个timer电池,然后双击toggle改到false就可以了。作者: L.Y.Blue 时间: 2012-3-31 09:01
新手,学习一下作者: bjnwyj 时间: 2012-3-31 14:36
必须顶必须学习!作者: bjnwyj 时间: 2012-3-31 14:38
再顶 ~~分享谢谢作者: artrustee 时间: 2012-4-1 00:25
我打开的时候后gh有提示信息: IO generate 16 messages。。。。 打开大致是这样的。。。
This document contains the messages that were recorded during the most recent Grasshopper® file read/write. Whenever a read/write operation fails or behaves unexpectedly, this summary will be compiled and put on display. If you experience problems saving or opening files, please include this log with any bug-report you file. You can use the Send... button to mail this report directly, or you can save the log and attach it to a personal email message. This log contains no personal information beyond what you supply, nor any other information that is not directly related to Grasshopper.
是版本需要更新么?作者: artrustee 时间: 2012-4-1 00:28
能把大致的思路说一下么。。。作者: jason 时间: 2012-4-1 12:13 13#artrustee
我gh版本是最新的,kangaroo也是。。可能旧版打不开吧。这个仅仅是模拟张拉结构下落到地面的变化过程,颜色可以显示绳长的改变情况。这个结构要是连起来的话是这样的。。作者: duzhen 时间: 2012-4-1 12:17
有点深奥 喔 搞不懂啊作者: duzhen 时间: 2012-4-1 12:18 6#hexianghai 感谢发帖的朋友作者: duzhen 时间: 2012-4-1 12:19 2#jason 回复那么多 还是下不下来啊作者: jason 时间: 2012-4-1 12:28 14#jason 补张平面的作者: jason 时间: 2012-4-1 12:31 13#artrustee
不过说实话,下面那张连起来的结构在kangaroo里怎么定义我还真没想出来,要是有思路的话感谢提供啊,呵呵作者: archizrl 时间: 2012-4-2 22:12
学习之中,作者: s.k. 时间: 2012-4-6 21:56
貌似有点深奥,没看懂作者: redspread 时间: 2012-4-13 00:57
下载研究一下,正好有真实模拟的尝试作者: 活建鬼 时间: 2012-4-13 22:54
袋鼠是个好插件作者: 鄭小怪 时间: 2013-4-18 00:55
學習了!! 其他型態的TENSGRITY 也可以這樣子模擬囉?