NCF参数化建筑论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

搜索
查看: 12726|回复: 18
打印 上一主题 下一主题

[工作记录] Boy's Surface

  [复制链接]
跳转到指定楼层
1m
发表于 2010-11-9 03:32:57 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
本帖最后由 panhao1 于 2010-11-9 03:37 编辑 Boy's SurfaceModel of the projective plane without singularities. Found by Werner Boy on assignment from David Hilbert to disprove its existence. Polynomial by Francois Apery. Parametric equation: x =(2/3)*(cos(u)*cos(2*v)+sqrt(2)*sin(u)*cos(v))*cos(u) / (sqrt(2) - sin(2*u)*sin(3*v)) y =(2/3)*(cos(u)*sin(2*v)-sqrt(2)*sin(u)*sin(v))*cos(u) / (sqrt(2)-sin(2*u)*sin(3*v)) z =sqrt(2)*cos(u)^2 / (sqrt(2) - sin(2*u)*sin(2*v)) Polynomial: 64*(1-z)^3*z^3-48*(1-z)^2*z^2*(3*x^2+3*y^2+2*z^2)+ 12*(1-z)*z*(27*(x^2+y^2)^2-24*z^2*(x^2+y^2)+ 36*sqrt(2)*y*z*(y^2-3*x^2)+4*z^4)+ (9*x^2+9*y^2-2*z^2)*(-81*(x^2+y^2)^2-72*z^2*(x^2+y^2)+108*sqrt(2)*x*z*(x^2-3*y^2)+4*z^4)=0 摘自:[url=http://jalape.no/math/boytxt]http://jalape.no/math/boytxt [/url]以下来自 mathworld.wolfram.com The Boy surface is a nonorientable surface that is one possible parametrization of the surface obtained by sewing a Möbius strip to the edge of a disk. Two other topologically equivalent parametrizations are the cross-cap and Roman surface. The Boy surface is a model of the projective plane without singularities and is a sextic surface.
A sculpture of the Boy surface as a special immersion of the real projective plane in Euclidean 3-space was installed in front of the library of the Mathematisches Forschungsinstitut Oberwolfach library building on January 28, 1991 (Mathematisches Forschungsinstitut Oberwolfach; Karcher and Pinkall 1997). The Boy surface can be described using the general method for nonorientable surfaces, but this was not known until the analytic equations were found by Apéry (1986). Based on the fact that it had been proven impossible to describe the surface using quadratic polynomials, Hopf had conjectured that quartic polynomials were also insufficient (Pinkall 1986). Apéry's immersion proved this conjecture wrong, giving the equations explicitly in terms of the standard form for a nonorientable surface, 下面是我自己的模型

评分

参与人数 1强度 +3 照度 +30 收起 理由
skywoolf + 3 + 30

查看全部评分

分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 分享分享
2m
 楼主| 发表于 2010-11-9 03:37:09 | 只看该作者
Polynomial的方程不太容易出好效果 我3G内存都爆掉了 最多也就是第一张图那个效果 用k3dsurf完全不行 我用的是metaball的网格做的
3m
发表于 2010-11-9 08:01:03 | 只看该作者
本帖最后由 claudemit 于 2010-11-9 08:02 编辑 用K3D里的公式和搜到的公式可以用GH和RS做出"形似“的来。。。 QQ截图未命名00.jpg (63.48 KB, 下载次数: 0)
4m
发表于 2010-11-9 09:04:59 | 只看该作者
试过了,效果还行
5m
发表于 2010-11-9 20:16:35 | 只看该作者
333.jpg不错 很本质
6m
发表于 2010-11-9 22:34:21 | 只看该作者
很好的教程, 多谢楼主分享!~~
7m
发表于 2010-11-10 02:16:21 | 只看该作者
要將這個帖子轉成RS和GH樓主數學觀念真好~~~
8m
发表于 2010-12-7 18:25:47 | 只看该作者
挺好的~~~~~~~~~~~~
9m
发表于 2011-3-7 07:54:05 | 只看该作者
不错不错 顶你一个
10m
发表于 2011-4-4 17:48:35 | 只看该作者
不错不错 顶起
11m
发表于 2011-4-11 22:17:31 | 只看该作者
hehe 请问潘浩哥是华南的么??
12m
发表于 2011-4-24 16:34:49 | 只看该作者
刚刚开始看这种东西
13m
发表于 2011-8-3 14:39:29 | 只看该作者
雕塑用的...我比较喜欢能够真正用到建筑上的东西~ 不错啦~顶一下~
14m
发表于 2011-8-16 12:48:44 | 只看该作者
恩 還不錯 !!! very nice
15m
发表于 2011-8-21 15:36:55 | 只看该作者
大家好我是新来的请大家多关照啊
16m
发表于 2011-11-7 10:01:51 | 只看该作者
nice!!学习了
17m
发表于 2011-11-28 21:44:59 | 只看该作者
很好的教程, 多谢楼主分享!~~
18m
发表于 2011-12-6 09:26:33 | 只看该作者
貌似有很多难点,最近大大们都不在……
19m
发表于 2012-1-2 19:45:19 | 只看该作者
楼主 厉害啊啊

小黑屋|手机版|NCF参数化建筑论坛 ( 浙ICP备2020044100号-2 )    辽公网安备21021102000973号

GMT+8, 2024-4-28 18:30 , Processed in 0.360588 second(s), 22 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表